Temperature control blocks support Thermocouple elements and PT100 elements.
FX2N-2LC and FX3U-4LC temperature control blocks are used when the internal PID functions are not precise or fast enough.

Modelo (Number of channels)	Available sensor	Especificaciones de entrada		Applicable FX PLC
		Artículo	Temperature input	FX 3S	FX 3G	FX 3U	FX 3GC	FX 3UC
FX3U-4AD-PT-ADP (Input 4 ch)	Platinum resistance thermometer sensor Pt100, 3-wire	Entrada salida analógica	De -50 a 250 ºC Salida digital (de -500 a 2500)	*8 ○ Máx. 1 unidad	*3*4 ○ Máx. 2 unidades	*5 ○ Máx. 4 unidades	○ Máx. 2 unidades	*5*6 ○ Máx. 4 unidades
		Resolución	0,1 ºC
FX3U-4AD-PTW-ADP (Input 4 chï)	Platinum resistance thermometer sensor Pt100, 3-wire	Entrada salida analógica	De -100 a 600 ºC Salida digital (de -1000 a 6000)	*8 ○ Máx. 1 unidad	*3*4 ○ Máx. 2 unidades	*5 ○ Máx. 4 unidades	○ Máx. 2 unidades	*5*6 ○ Máx. 4 unidades
		Resolución	0,2 to 0.3°C
FX3U-4AD-TC-ADP (Input 4 ch)	Termopar K/J type	Entrada salida analógica	K type: -100 to 1000°C Salida digital (de -1000 a 10000) J type: De -100 a 600 ºC Salida digital (de -1000 a 6000)	*8 ○ Máx. 1 unidad	*3*4 ○ Máx. 2 unidades	*5 ○ Máx. 4 unidades	○ Máx. 2 unidades	*5*6 ○ Máx. 4 unidades
		Resolución	K type: 0,4 °C J type: 0,3 ºC
FX2N-8AD (Input 8 ch) Discontinued	Termopar K/J/T type	Entrada salida analógica	K type: -100 to 1200°C Salida digital (de -1000 a 12000) J type: De -100,0 a 600 ºC Salida digital (de -1000 a 6000) T type: -100,0 to 350°C Salida digital (de -1000 a 3500)	×	○ Máx. 8 unidades	○ Máx. 8 unidades	*9 ○ Máx. 8 unidades	*1*2 ○ Máx. 8 unidades
		Resolución	[Typical example] K type: 0,1 ºC J type: 0,1 ºC T type: 0,1 ºC
FX2N-2LC (Input 2 ch)	Platinum resistance thermometer sensor Pt100, JPt100	Entrada salida analógica	[Typical example] Pt100: De -200 a 600 ºC JPt100: -200 to 500°C	×	○ Máx. 8 unidades	○ Máx. 8 unidades	*9 ○ Máx. 8 unidades	*1*2 ○ Máx. 8 unidades
		Resolución	0.1°C or 1°C (differs depending on the sensor used)
	Termopar K/J/R/S/E/T/B/N/ JIS C 1602-1995/ PLII/W5Re/W26Re/ U/L type	Entrada salida analógica	[Typical example] K type: -100,0 to 1300°C J type: -100,0 to 800°C
		Resolución	0.1°C or 1°C (differs depending on the sensor used)
FX3U-4LC (Input 4 ch)	Platinum resistance thermometer sensor Pt100, JPt100, Pt1000	Entrada salida analógica	[Typical example] Pt100: De -200 a 600 ºC Pt1000: -200,0 to 650.0°C	×	○ Máx. 8 unidades	*7 ○ Máx. 8 unidades	*9 ○ Máx. 8 unidades	*1*7 ○ Máx. 6 unidades
		Resolución	0.1°C or 1°C (differs depending on the sensor used)
	Termopar K/J/R/S/E/T/B/ N/PLII/W5Re/ W26Re/U/L type	Entrada salida analógica	[Typical example] K type: -200,0 to 1300°C J type: -200,0 to 1200°C
		Resolución	0.1°C or 1°C (differs depending on the sensor used)
	Low voltage input	Entrada salida analógica	0 to 10 mV DC 0 to 100 mV DC
		Resolución	0,5  μV or 5,0  μV (differs depending on the sensor used)

• *1When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
• *2FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D, FX3UC-**MT/DSS, FX3UC-16MR/D(S)-T: 8 units.
• *3When connecting to FX3G, FX3G-CNV-ADP is required.
• *4FX3G 14 pt, 24 pt models: 1 board. 40 pt, 60 pt models: 2 boards.
• *5For connection to FX3U and FX3UC-32MT-LT(-2), function expansion board is required.
• *6Supported by FX3UC-32MT-LT ver. 1,30 and later.
• *7Supported by FX3U and FX3UC ver. 2,20 and later.
• *8When connecting to FX3S, FX3S-CNV-ADP is required.
• *9When connecting to FX3GC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.